general/other parts
Rearsets
Custom designed and made in house
Rearsets for RD250/350LC
Made from 6082T6 Aerospace alloy, supplied bare ready for polishing or anodising. Incorporating anti vibration exhaust mounts and suitable for either a Brembo 40mm mount master cylinder or a YPVS/R1 master cylinder. Exhaust mount position is different to stock
Master Cylinder not included
Rearsets for RD350YPVS
Made from 6082T6 Aerospace alloy, supplied bare ready for polishing or anodising. Incorporating anti vibration exhaust mounts and suitable for either a Brembo 40mm mount master cylinder or a YPVS/R1 master cylinder. Exhaust mount position is different to stock
Master Cylinder not included
Rearsets for RD500YPVS
Adjustable to multiple positions on a matrix of holes, designed for Brembo 40mm mount master cylinder. Made throughout from 6082T6 Aerospace alloy. Some adjustment may be needed with the proximity to the stock sidestand.
Available with or without Exhaust Mounts
Master Cylinder not included
Rearsets for RD500YPVS
With Exhaust Mounts
Rearsets for RD500YPVS
.jpeg/:/cr=t:0%25,l:0%25,w:100%25,h:100%25/rs=w:360,h:270,cg:true)
Brembo Rear Brake Master Cylinder
Brand New OE on many high end sports bikes and most race bikes. Suitable for the NK Racing range of rearsets
Custom Rearsets
One off designs, made to order
Cafe Racer Project
Jack Up Plates
One Off Designs RD500
GP Style Quick change rear wheel axle adjusters
GP Style with Stand Lifters
Captive spacers, captive threads, spindle puller, stand lifters. All Billet construction for quick change, GP Style
One Off designs made to Order
Conversion to your swingarm
Billet Chain Adjusters
RGV250 M,N&P
7022 Aerospace alloy, Titanium Locknuts and R6 Adjuster studs to replace the original fixed stud set up.
NSR250 MC21
To use with the standard Honda hardware
RD250/350LC
YamaGamma Engine Mounts
To install RD250/350LC or YPVS Engine into a Suzuki RG250 Frame
Billet Headlight Brackets
To fit RGV250 USD fork models made from 6082T6
YZR500 1990 Seat Unit for RD500
Specifically designed for a perfect fit around the RD500 frame and tank. Made from GRP
YZR500 2001 Seat Unit for RD500
Specifically designed for a perfect fit around the RD500 frame and tank. Made from GRP
YZR500 2001 Seat Unit for RD500
Specifically designed for a perfect fit around the RD500 frame and tank. Made from GRP
Custom Machining and Fabrication
Flush Filler Cap
Flush Filler Cap installed into Alloy Race Tank
Custom Oil Tank
Aluminium 2 stroke oil tank mounted in seat unit
Custom Rear Sprocket and carrier
Made to suit custom wheel application
Custom Race Gear Shifter
Made to suit custom application
Fabricating One Off Suspension Drop Links
A look at all the parts that go into making rearsets.
I don't mould the rubber/plastic parts or make the rod end bearings or bolts. But everything else is made in house.
Custom Machining and Fabrication
Lock Up Clutch
Custom Rear Sprocket and carrier
Made to suit custom wheel application